Rottler F107AH
Multi Purpose CNC Machining Center including HSK80A Spindle Taper
_3.jpg "F107AH")
Contact SalesMachine Operations
Applicable Industries
PDF Resources
F100 Brochure F107AHL F109AHL Optional Equipment Catalog F100 Series Optional Equipment Catalog_3.jpg)
_3.jpg)
All F100 machines employ an array of features which help maximize the productivity capabilities of the machines.
Quick tooling change-over maximizes the versatility and flexibility of the machine, allowing boring and surfacing in
one set-up. F100 Series machines have the capability of Boring, Surfacing, Line Boring, and Universal Machining.
Traveling column and spindle movements are operated by precision ball screws and AC servo motors. Optional
Automatic cycle software and production tooling allow complete block banks to be machined without operator
attendance, once the job is set up and the "cycle start" button is pressed, the operator is free to "walk away" and do
other work while the F100 completes a block bank or main line bore unattended!
Quick tooling change-over maximizes the versatility and flexibility of the machine, allowing boring and surfacing in
one set-up. F100 Series machines have the capability of Boring, Surfacing, Line Boring, and Universal Machining.
Traveling column and spindle movements are operated by precision ball screws and AC servo motors. Optional
Automatic cycle software and production tooling allow complete block banks to be machined without operator
attendance, once the job is set up and the "cycle start" button is pressed, the operator is free to "walk away" and do
other work while the F100 completes a block bank or main line bore unattended!
- F100 machines incorporate the use of a large diameter hard chromed
spindle, utilizing high precision angular contact bearings and automatic
lubrication.
- Machine ways are induction hardened and coated with turcite low friction
material and supplied with air pressure to reduce friction and give long
service life.
- Anti friction ball screws and AC Servo motors provide precise machine
positioning and rapid feed rates.
- Air power drawbar allows cutterheads to be changed in seconds increasing
productivity and reducing operator fatigue - the machine can be changed
from boring to surfacing in less than 15 seconds!
- Automated workhead tilting system for surfacing provides "back clearance"
for superior surface finish.
Increased clearance from spindle centerline to the machine's column allow
large castings to be set up and machined.
Machine Using Windows Operating System and Industrial PC with Intel
Processor.
(400mm) Computerized Touch Screen.
(.25mm) Medium Mode .001" (.01mm) Fine Mode .0001" (.002mm)
Over 20 years ago, Rottler pioneered automation by utilizing electronics and computers. Today, Rottler utilizes the latest computer technology to make automation easy to learn, versatile to operate and upgradeable for future software. Windows operating system and touch screen control make a simple operator interface. Touch screen control allows ONLY the buttons and information required for each operation to be displayed, "hiding" the complex computer functions in the background. Operators are able to learn advanced machining functions in just a few days.
Common, everyday jobs such as boring, surfacing and line boring can be easily automated with the F100 machines. Operator attendance is only required for set up. The machine is able to bore along a complete cylinder bank automatically. Likewise, the machine is capable of line boring along a main line automatically.
Often when surfacing a block, more than one pass is required. The F100 can be programmed for multiple passes, moving down the exact amount each pass and completing with a finish cut for the required surface finish during the final pass.
Bore centers are either measured from the block or from a blueprint, then saved in the memory. The F100 machine moves automatically to the exact positions, which is useful when multiple boring operations are required for jobs such as resleeving. For special applications, Optional Renishaw Wireless Probing can automatically find bore centers and measure diameters.
When resleeving the lower seal area of wet liner blocks, it is often required to bore adiameter larger than the upper diameter. Rottler's Automatic Lower Sleeve Repair Software allows the machine to offset so that the boring tool will clear the upper diameter, move down, then move back on center to bore the lower area on center with the upper bore. Once boring is complete, the machine will index the cutting tool, offset the programmed amount and retract and continue to the next cylinder - automatically.
Common, everyday jobs such as boring, surfacing and line boring can be easily automated with the F100 machines. Operator attendance is only required for set up. The machine is able to bore along a complete cylinder bank automatically. Likewise, the machine is capable of line boring along a main line automatically.
Often when surfacing a block, more than one pass is required. The F100 can be programmed for multiple passes, moving down the exact amount each pass and completing with a finish cut for the required surface finish during the final pass.
Bore centers are either measured from the block or from a blueprint, then saved in the memory. The F100 machine moves automatically to the exact positions, which is useful when multiple boring operations are required for jobs such as resleeving. For special applications, Optional Renishaw Wireless Probing can automatically find bore centers and measure diameters.
When resleeving the lower seal area of wet liner blocks, it is often required to bore adiameter larger than the upper diameter. Rottler's Automatic Lower Sleeve Repair Software allows the machine to offset so that the boring tool will clear the upper diameter, move down, then move back on center to bore the lower area on center with the upper bore. Once boring is complete, the machine will index the cutting tool, offset the programmed amount and retract and continue to the next cylinder - automatically.
| F107AH Machine Specifications | American | Metric |
|---|---|---|
| Control | Automatic | |
| Touch Screen | 15" | 381mm |
| Table - Size | 67.5" x 240" | 1700 x 6100mm |
| Table - T Slots | 4 | |
| Travel - Horizontal (X Axis) | 164" | 4166mm |
| Travel - In/Out (Y Axis) | 24" | 600mm |
| Travel - Vertical (Z Axis) | 36" | 915mm |
| Travel - Spindle Nose to Table | 67.58" | 1716mm |
| Travel - Spindle Center to Column | 43.5" | 1100mm |
| Spindle - Rotation Speed | 0 to 1000 RPM | |
| Spindle - Motor | 17 HP | 12.75 Kw |
| Cylinder Bore Range (with Optional Cutterheads) | .75" - 20" | 19 - 500mm |
| Line Bore Range (with Optional Cutterheads) | 2" - 12" | 50 - 300mm |
| Surfacing Cutterhead Diameters | 10", 15", 18" & 22" | 250, 340, 460 & 575mm |
| Dimensions - Floor Space Requirements | 130D x 362W" | 3300D x 9200Wmm |
| Machine Weight | 50000 lbs | 22500 kg |
| Electrical Requirements | 220V, 60A, 50/60Hz, 3Ph | |
| Air Requirements | cfm @ 100 psi | l/min @ 6 bar |
| Paint Color Code | RAL9002 (Grey White) | |
