Video
Rottler F90Y Line Boring Metal Spray
Rottler F90Y Lower Sleeve Boring
Rottler F90Y Automatic Centering
Rottler F90Y : Milling Metal Spray
Rottler F99Y : Line Boring Natural Gas Frame
Features
- Computer Numerical Control Machine using Windows XP Operating System and Industrial PC with Intel Processor. Precision Vertical and Horizontal Stops are input thru a 15" (390mm) Computerized Touch Screen. Software Options available for Programmable & Automated Cycles such as Boring, Surfacing, Lower Sleeve Offset Boring, Water Hole Repairs, Main & Cam Line Boring, General CNC Machine Work
- 3 Axis movement by Precision Ball Screws & AC Servo Motors - Infinitely Variable
- Horizontal Movement (X Axis) - Left and Right Direction - 132" (3350mm)
- Horizontal Movement (Y Axis)- In and Out Direction - 12" (300mm)
- Vertical Movement (Z Axis) - Up and Down - 30" (750mm)
- Internet Connection available for future service and software upgrades
- Precision Vertical and Horizontal Homing Routine for Repeated Program Use.
- Vertical, Horizontal and Spindle Load Monitoring for Fast Overload Shut Down
- Precision Position Display in .0001" (.002mm) Resolution.
- Electronic Handwheel - Per Detent .001"(.01mm) Coarse Mode .0001"(.002mm) Fine Mode
- High Performance Spindle Rotation AC Brushless Servo Motor and Drive System
- Hard Chromed Precision Spindle with High Speed Angular Contact Bearings
- Fast Rapid and Jog Speeds for Reduced Cycle Time.
- Automatic Workhead Tilt System for Back Clearance during Surfacing
- Air Assisted Quick Change Cutterhead Draw Bar System
- One Piece Heat Treated Mehanite Cast Iron Machine Castings
- Air Pressurized Column for Less Friction and Accurate Positioning.
- Turcite Coated Slideways for Low Friction and Extended Life
- Automatic Central Lubrication System monitored by controller.
- Chip Guard with Adjustable Pivot Arm.
- Operation, Programming and Spare Parts Manual.
Overview
Control
Images
Specs
|
| 3 T Slots | 33” x 135” (850mm x 3430mm)xbitm |
|
| X Travel | 132" (3350mm) |
| Y Travel | 12" (300mm) |
| Z Travel | 30" (750mm) |
| Rapid Travel X Y | none |
|
| Spindle Motor Power | 10.5 HP (7.8 kW) |
| Spindle Motor Speed (RPM) | To 1000 RPM |
| Max Distance Spindle to Column | 25.5” (648mm)kW) |
|
| Weight (without options) | 18,000 lbs (8,180kgs) |
| Dimensions | 231” x 96” (5.87m x 2.44m))xbitm |
| Shipping Dimensions | 7' x 20' x 10' [2134 x 6000 x 3048mm] |
| Voltage Requirement | 220V (12kW) 70 Amps 3 Phase 50/60 Cycles |
| Air Requirement | 1 cf/min @ 100 psi (.028 m3/in @ 7kg/cm2) |
|
| Cutterhead Diameter | 10” (250mm), 14” (360mm), 18” (460mm), 22” (570mm)age/pj |
| Maximum Height from Table to Cutterhead | 50.1" (1273mm) |
| Bore Range | .75” (19mm) to 20” (508mm)-xbitm |
F90 Series Touch Screen Online Demo
