Features
- Digital Display shows Touch Off Point, Length of Work piece, RPM and feed rate in inches/revolution (mm/rev)
- Flat Panel Control with Lexan Layover for Durability
- Programmable Rapid Touch Off Set Point for reduced Cycle Times
- On completion of Automatic Cycle, Cutterhead returns to Vertical Zero Height
- Infinitely Variable Spindle Speeds from 350-1800 RPM for machining different metals
- Infinitely Variable Travel Feeds .001 - .080" (.025-2mm) per Cutterhead Revolution for any Desired Surface Finish Roughness
- Maximum Work Head Travel 50" (1270mm)
- High Rapid Traverse Rate for Reduced Cycle Time - 160" (4m) per minute
- Belt Driven Precision Ground Ball Screw for Work Head Traverse
- Large Diameter Triple Angular Contact Bearings in Heavy Duty Hard Chromed Spindle
- Slideways Coated with Low Friction Turcite for Durability
- Automatic Scheduled Maintenance Monitor
- 16" (420mm) Cutterhead
- Tool holders (2) for 3/8" (9.52mm) IC round or square inserts (Optional 1/2" (12.70mm) IC Toolholders available)
- Cutterhead Guard with Chip Collection and Vacuum Attachment Outlet
- Depth Dial Indicator Assembly for Rapid Touch Off on Surface to be Machined
- Large One Piece Base Casting with 3 T Slots for Universal Fixture Mounting
- Multi Piece Metal Slideway Covers protect Ball Screw and Slideways from Dust and Chips
- Instruction Manual
Overview
Fine Surface
Finish Infinitely variable speeds and feeds allows surface finished as low as 2Ra to 6Ra for today's MLS (Multi Layer Steel) head gaskets.
Dry Cutting System
Eliminates coolant disposal and makes clean up a breeze! Cutterhead shroud directs dust and chips into optional vacuum system.
Return to Vertical Zero
The cutterhead always returns to vertical zero - ready for the next pass.
Latest Control Technology
State of the art controls make the most advanced surfacing machines available today. Protection and Long Life Multi Layer Steel Guards cover and protect the slideways for extra long service life.
Fast Floor to Floor
Time Heads can be surfaced in less than 2 minutes and a pair of V8 heads in less than 8 minutes. VersatileCapable of surfacing large diesel heads such as CAT3406, and diesel blocks such as Detroit V71 and Mercedes OM440.
T Slot Base Large
Flat T Slot Base allows the mounting of any fixture and any job - jacks can be placed anywhere!.
Control
Images
Specs
|
| T Slot Table Size | 54” x 21” (1370mm x 530mm) |
|
| Cutter Travel Horizontal | 50” (1275mm) |
| Cutter Travel Vertical | 6” (150mm) |
|
| Spindle Feed | .001”-.080” (.025-2mm) |
| Spindle Motor Speed (RPM) | 350-1800 |
|
| Weight (without options) | 4500lbs (2000kg) |
| Dimensions | 85” x 46” (2160mm x 1170mm) |
| Voltage Requirement | 15A 210-240V 1PH 50/60 HZ |
| Air Requirement | .5 cfm @100PSI/6 bar |
|
| Cutterhead Diameter | 16” (420mm) |
| Maximum Distance from Cutting Inserts to Machine Base | 25” (635mm) |
| Rapid Traverse Rate per Min | .160” (4m) |
