Features
- 1 502-1-30 Block Clamp Arm Assembly
Overview
The A model handles everything as the M models but adds some great automation. The A model will center automatically and bore to exact programmable depths to within .0002. This is outstanding for shops that O ring and counter bore. The program will store 100 jobs including ; feed rate , spindle RPM, depth of cut, block clearance height, centering depth. The vertical zero feature in unison the LED Readout in .0001 increments.The pulse hand wheel allows you to feed .0001 per click or .001 per click. The LED reads the actual vertical position in .0001.
This heavy-duty machine was designed for standard and large capacity machine work. The spindle diameter has been increased to 3.25" (8.2mm) for extra heavy duty machining up to 9" (230mm) bore size. Large sleeve cuts can be taken at high spindle rpm's, and in many blocks, one pass sleeve cuts are possible to increase productivity. Floor -to-floor bore a V8 block in 15 minutes. Bore through a 6 inch bore 4 inch in diameter in 35 seconds, .250 sleeve cuts are not a problem. Tooling is available from 1.500 to 9 inches in diameter. Straight through and blind hole boring tools are available. Simple controls and independent drives for the feed and spindle rotation. Precision ball screws on the feed give the ultimate feed control.
Control
Images
Specs
|
| T Slot Table Size | 50" x 21” 1270 mm x 530 mm-xbitm |
|
|
| Spindle Feed | .001 to .012 inches, .025 to .300 mm per rev. |
| Spindle Travel | Z - 15” 381 mm 50”, X - 1270 mm |
| Spindle Motor Power | 3.3 HP 2.5kW |
| Spindle Motor Speed (RPM) | Variable 100 to 1200 RPM |
| Spindle Taper | 26” 670 mm |
|
| Weight (without options) | 3300 lbs 1500 kg |
| Dimensions | 64" x 46" 1625 mm x 1170 mm |
| Voltage Requirement | 208-240 V, Single Phase 50-60 HZ, 40 Amp |
| Air Requirement | 1 cfm @ 90 - 100 psik |
|
| Bore Capacity Standard | 3.250" to 5.0" 83mm to 127mm |
| Bore Capacity Optional | 1.5" to 9.0" 38mm to 228mm |
The A model handles everything as the M models but adds some great automation. The A model will center automatically and bore to exact programmable depths to within .0002. This is outstanding for shops that O ring and counter bore. The program will store 100 jobs including ; feed rate , spindle RPM, depth of cut, block clearance height, centering depth. The vertical zero feature in unison the LED Readout in .0001 increments.The pulse hand wheel allows you to feed .0001 per click or .001 per click. The LED reads the actual vertical position in .0001.
This heavy-duty machine was designed for standard and large capacity machine work. The spindle diameter has been increased to 3.25" (8.2mm) for extra heavy duty machining up to 9" (230mm) bore size. Large sleeve cuts can be taken at high spindle rpm's, and in many blocks, one pass sleeve cuts are possible to increase productivity. Floor -to-floor bore a V8 block in 15 minutes. Bore through a 6 inch bore 4 inch in diameter in 35 seconds, .250 sleeve cuts are not a problem. Tooling is available from 1.500 to 9 inches in diameter. Straight through and blind hole boring tools are available. Simple controls and independent drives for the feed and spindle rotation. Precision ball screws on the feed give the ultimate feed control.
